Water cartridge

Kits of cartridges for flow filters

A set of cartridges is designed to replace used elements in flow filters and reverse osmosis systems. Purpose of the cartridges – complex post-treatment of tap water.

Kits of cartridges for flow filters

Set No. 1

Mechanical cleaning cartridge 5 microns
Granular Activated Carbon Cartridge
Mechanical cleaning cartridge 1 μm

Set No. 2

Mechanical cleaning cartridge 5 microns
Granular Activated Carbon Cartridge
Sintered Activated Carbon Cartridge (Carbon Block)

Set No. 3

Mechanical cleaning cartridge 5 microns
Disinfection cartridge
Sintered Activated Carbon Cartridge (Carbon Block)

Set No. 4

Mechanical cleaning cartridge 5 microns
Softening cartridge
Sintered Activated Carbon Cartridge (Carbon Block)

Equipment

The complete set of each set is aimed at removing certain contaminants from the water, which, with the correct selection of the set, allows not only to purify the water from unwanted impurities but also to improve the quality and taste of the source water.
The life of a set of cartridges is determined by the lowest yield of the cartridges it contains. The resource of a set of cartridges depends on the composition of the source water and the volume of water consumption.
It is strongly recommended to timely replace the cartridges in accordance with the terms specified in the passport of your cleaning system.
Shelf life 5 years in the original packaging in the absence of dust, corrosive vapors, and gases at temperatures from 5 ° C to 40 ° C and air humidity, not more than 50%.